Performance Parts
Increase your speed
Customise your station
Both the Speedster and the Mach One can be laid out in different ways.
That means both systems can be used as a “tabletop” but also as an “upper-bar” configuration.
See the different options below
The Speedster.
The Speedster: Table top spiller
This section sits in the ice chest. There are two options here: either 4 x 1/9 gastronorm containers (supplied as standard) or fitting the table top spiller. This option is useful if the bar is used as a tabletop set-up or if no spiller rack is used. See the image above.
The Speedster: Table tray
In the left-hand corner of the Speedster you can choose between several options. It takes 3 x 1/9 containers, 2 x 1/6 or 1 x 1/3 gastronorm containers, or the table tray. This is an extra option for keeping your shakers or jiggers to hand during the shift. If you use the “tabletop” set-up, we recommend adding this option. See the image above.
The Speedster: Sideway ice divider
This is an extra option if you prefer to scoop ice sideways. Scooping sideways puts less strain on your arm and shoulder. This divider can be fitted on either the left or the right side of the ice bin. See the image above.
The Speedster: Spiller Rack
The spiller is height-adjustable from 17 cm to 25 cm. You can also adjust it forwards and backwards. On the right-hand side of the spiller there is a drain that empties into the waste strainer of the cocktail station itself, which makes it easy to clean. The spiller supports an ergonomic posture during your shift. Your whole body stays better balanced, so back strain becomes a thing of the past. Want the grate laser-cut with your own logo? That is possible! See the image above.
The Mach One.
The Mach One: Tabletop spiller
This section sits in the ice chest. There are two options here: either 3 x 1/9 gastronorm containers (supplied as standard) or fitting the table top spiller. This option is useful if the bar is used as a tabletop set-up or if no spiller rack is used. See the image above.
The Mach One: Table tray
In the “ice chest” of the Mach One you can choose between several options. It takes 3 x 1/9 containers, 2 x 1/6 or 1 x 1/3 gastronorm containers. Or the table tray. This is an extra option for keeping your shakers or jiggers to hand during the shift. If you use the “tabletop” set-up, we recommend adding this option. See the image above.
The Mach One: Spiller Rack
The spiller is height-adjustable from 17 cm to 25 cm. You can also adjust it forwards and backwards. On the right-hand side of the spiller there is a drain that empties into the waste strainer of the cocktail station itself, which makes it easy to clean. The spiller supports an ergonomic posture during your shift. Your whole body stays better balanced, so back strain becomes a thing of the past. Want the grate laser-cut with your own logo? That is possible! See the image above.
Your own logo in the stainless steel
We can laser-cut your logo into the spiller grates (which, by the way, are always smaller than 50 cm so they fit in the dishwasher!). Send us your logo as a vector file (ai, eps, dwg, dxf) and email us about the possibilities.
Frequently asked questions
Which parts are available?
For The Speedster: tabletop spiller, table tray, sideway ice divider and spiller rack. For The Mach One: tabletop spiller, table tray and spiller rack.
Will they fit my existing station?
The parts are designed per model, so choose the version that matches your station. If you are not sure which version you have, send us a photo and we will work it out for you.
Is the spiller height-adjustable?
Yes, from 17 to 25 cm, and forwards and backwards as well. That way you set it to the height of your bartenders. It saves back strain during long shifts.
How do I clean the spiller?
On the right-hand side there is a drain that empties into the waste strainer of the station itself. The grates are also always smaller than 50 cm, so they fit straight into the dishwasher.
Can I have my own logo put into the grate?
Yes, we laser-cut your logo into the stainless steel of the spiller grates. Send your logo as a vector file (ai, eps, dwg or dxf) and we will look at the possibilities.
How quickly can I have one delivered?
We usually have our standard versions in stock and can deliver them quickly. If a product is not in stock, the delivery time is normally four to five weeks.
For custom work it depends on the complexity and the specifications. In most cases, allow around eight weeks.
What warranty is there, and can parts be ordered separately?
All parts and the stainless steel carry a two-year warranty under normal use.
We do not work with a fixed service partner. If something goes wrong within that period, you contact us directly — we assess the problem together and look for a suitable solution.
Parts are available separately. So in the event of wear or a defect you do not have to replace a complete component or an entire bar.